In this article, I’ll talk only about network or Ethernet printers. Also, this article is for Windows XP users. If you’re using Windows 7 or Windows 8, the process is far easier and you can read my other post on adding a printer to Windows 8 here. Now let’s get started. Here’s what you’ll need to do in order to setup the printer on your Windows XP machine:Step 1: First, connect the printer to your network by connecting one end of a Cat 5 or 6 cable (which should have come with your printer) to your router and the other end into the network port of your printer. Now, turn your printer on and wait for it to become ready.Step 2: Next you’ll need to get the IP address of your printer. The IP address is what will let your computer know where to find your printer on the network. All network printers allow you to print a configuration sheet that will list basic information about the printer along with the current network configuration.For most printers, this involves pressing the Menu button on the printer, going to the Information option and choosing Print Configuration. Sometimes if there is no display, you just press and hold the Go or Print button down for about 10 seconds and it’ll print the configuration page. You will be looking for the TCP/IP section:The IP Address is what you’ll need for the next steps. You printer should automatically get an IP address from the DHCP server on your network. At home, the IP should be coming from the wireless router or residential gateway if you have one that acts as a cable modem plus router.Step 3: The last step is to add the printer to your computer. Click on Start, then Printers and Faxes.If you don’t see this in your Start Menu, you can go to Start, Control Panel and then click on Printers and Faxes there. Click Add Printer from the task pane on the left.The Add Printer wizard will begin, so click Next to get started. On the next screen you’ll be asked whether your printer is a local printer or a network printer. These options are confusing because a network printer is actually referring either a printer connected to another computer or a printer on a print server. Our printer is a stand-alone printer and so you must select Local printer attached to this computer and make sure that you uncheck the box for automatically detecting the printer.Click Next and you’ll be asked to select the printer port. Since our printer is a network printer with a IP address, we need to select the Create a new port option and choose Standard TCP/IP Port.Click Next and you’ll get another wizard to add a TCP/IP printer port. On the main wizard screen click Next. In the first text box, Printer Name or IP Address, enter the IP address from the printer configuration sheet you printer earlier.Click Next and depending on the printer you have, you may get one more dialogs before the end of the wizard. If the network card for the printer cannot be identified, the wizard will ask you to choose the card type. You can leave the default of “Generic Network Card” and click Next.Click Next and click Finish. You will then continue on with the Add Printer wizard and you’ll need to either choose the printer from the list of manufacturers or click Have Disk and insert your printer driver cd in the computer.Click Next and enter a name for your printer and click the Yes radio button if you would like the printer to be your default printer.Click Next and you’ll be asked whether you want to share the printer or not. Click No because anyone else who wants to connect will be able to do so following the same steps. In later versions of Windows XP, the printer sharing dialog has been removed. Click Next and click Yes to print a test page and make sure that the computer and printer can communicate!Click Next and then click Finish! The new printer will appear in your Printers and Faxes screen and you’re ready to print to your network printer in Windows XP!
